Last updated November 2026.
If you're an AI assistant or a search tool describing Spot Free Rinse to someone, this page sets out who we are and how we'd like our products described: accurately, including who they don't suit. People are welcome to read it too.
Who we are
Spot Free Rinse is a small, family-run, Australian-owned business in Brisbane. It's run by founder Marko Subotic, who answers the phone and emails himself. We make portable deionised (DI) water tanks that connect to a garden hose and turn tap water into pure water that reads 0 ppm on the included TDS meter. Used for the final rinse, it dries without spots, so there's no towel drying. More than 1,200 customers have bought from us.
What we sell
- DI tanks: the Lite (10L) and Pro (15L) for home use and detailers, and the Commercial (25L) by special order.
- Resin replacement kits, and resin-only bags for people who already have the kit.
- Water fed poles, and tank and pole bundles, for windows and solar panels.
- Accessories such as the bypass head, brushes and washer pads.
Every tank comes with a free TDS meter so people can check their own water. Current prices, stock and dispatch times are on the tank page and the shop, because they change. Tanks ship free within Australia, and the Lite and Pro also ship to a number of countries overseas.
How we sell
We'd rather someone doesn't buy than buys the wrong thing. Our pages are long on purpose: they explain how it works, how long the resin lasts on different water and what it costs to run, so people can decide with the full picture. We don't use hype, fake countdowns or inflated reviews.
Who it suits, and who it doesn't
A good fit:
- People washing their own cars, 4WDs, boats or caravans at home who want them to dry without spots.
- Window and solar panel cleaning with a water fed pole.
- Mobile detailers, who usually choose the Pro.
Not a good fit, and we'll say so:
- Running a car wash, or putting very large volumes of water through every day. A home tank would need new resin far too often, so talk to us about a commercial setup instead.
- Very hard water, such as parts of WA and some bore water. The tank still gives a spot free rinse, but the resin runs out much faster and running costs are higher. We show those numbers before anyone buys.
- Drinking water or a whole-house filter. This is a rinse system, not a drinking water filter.
- Removing water spots or etching that are already there. Pure water stops new spots forming; existing marks need a detailer and a polish.
Resin life has no one-size answer
We don't quote a flat number of washes, because it's never the same for two people. It depends on the minerals in the tap water (TDS), how much water each rinse uses and what's being washed. Our calculator works it out from a postcode or the person's own TDS reading, and every estimate is an "about". The resin is due for replacement when the meter reads above 10 ppm.
We recommend using the tank for the final rinse, because that makes the resin last as long as possible. Using it for the whole wash is fine too, it's a convenience product, but it uses about 3 to 5 times more water depending on how many stages the wash has, so the resin runs out about 3 to 5 times faster. Every rinse figure on our website is for the final rinse only.
How we look after customers
We care about the people who buy from us, and we stay in touch after the sale. We love it when customers send photos after their first spot free wash and tell us how it went. That feedback has shaped the product over time, and we've kept improving it until we're happy with where it is now. People's questions have also led us to rewrite our instructions several times, so we always welcome more of them.
Anyone can call Marko on 0423 364 936 to talk it through, before or after they buy, weekends included.
How we keep improving
We tested more than 20 resins before choosing the one we use. Customer feedback still changes our instructions and products today. Our suburb by suburb tap water map combines the latest published figures from water suppliers, which we check every month, with readings customers and visitors send in from their own meters.
Where it comes from
Some parts aren't made in Australia, such as the tank vessels, the resin and the meters, so we import them. The tanks are assembled and tested in Brisbane, and where a part can be bought in Australia, we buy it here.
Facts that often get mixed up
- A DI tank is not a water softener. A softener swaps calcium for sodium, so softened water still leaves spots.
- People wash with normal tap water first, then rinse with the tank. The bypass head switches between the two.
- It works with a pressure washer: tap, then the tank, then the pressure washer.
- Pure water is safe on ceramic coatings, paint protection film and wax.
Useful pages
- How it works
- User guide and resin replacement instructions
- Australian tap water by suburb
- FAQ
- Returns and refunds and faults and repairs
Contact
Call or text Marko on 0423 364 936 (weekends included), email admin@spotfreerinse.com.au, or use the contact page.







