Tank + pole bundle
DI water tank + 30ft water fed pole kit
Clean windows and solar panels with pure water. The tank makes the pure water, the pole puts it on the glass, and it dries clear with no squeegee.
4.97 from 72 reviews of the tank
Only need double storey? See the tank + 22ft bundle.
- Ships next business day
- 30ft WFP kit included
- Bypass head fitted
- TDS meter included
- Free shipping
- Assembled and tested in Brisbane
It depends on your tap water. Put in your postcode, or your own TDS reading if you have one.
Example at 300 ppm. Pop your postcode in to see yours.
Lite 10L
850 to 970 L
Pro 15L
1,330 to 1,500 L
Commercial 25L
2,230 to 2,500 L
Litres of pure water from each full set of resin. Use the bypass for scrubbing and pure water only for the rinse, and each set goes a lot further. Postcode figures are a guide from local water suppliers and your tap can differ. Your free TDS meter gives the exact reading.
"This unit lasts so much longer than the other ones that I have used and the resin replacement system is quick and so easy. The pole is light and comfortable. Amazing products."
See it on the job
Our customers and us, cleaning glass with pure water from our tanks.
What's in the bundle
Just the essentials, shipped together. The tank makes the pure water, the pole puts it on the glass.

Part 1
DI water tank
Lite 10L or Pro 15L, filled with resin
- Ready to use the day it arrives
- Bypass head fitted, so you scrub with tap water and rinse pure
- TDS meter to check your tap and your tank
- 2 m connector hose, tap to tank
- Simple instructions, and a real person on the phone

Part 2
30ft water fed pole kit
Carbon fibre and fibreglass hybrid
- Extends to about 9.18 m in 6 sections, for regular third storey work
- Closes to just under 1.8 m
- Adjustable angle brush with 6 brass jets: 2 fan on the outside, 4 pencil in the middle
- Extra angle adapter for other attachments
- 10 m internal hose, runs inside the pole
- On/off valve at the handle
- On/off valve just before the brush, for low windows with the pole collapsed
Keep the flow turned down
The six brass jets put out a lot of water. For most windows, half or a quarter flow is all you need, so set one of the two valves there and leave it. Full flow is there for the odd job that needs it, but most of the time it just uses up your resin faster with no better result.
- Assembled and tested in Brisbane
- Free shipping Australia-wide
- Brisbane based support
No hose reel in the box, on purpose. Most people already have one. If you don't, grab the length that suits your jobs from any hardware store, whether that's 30 m or 50 m. We only include what you'll actually use, so you're not paying for bells and whistles.
Warning: contains a button battery
The free TDS meter supplied with this bundle contains a CR2032 lithium button battery. Keep new and used batteries out of reach of children. If swallowed, a lithium button battery can cause severe or fatal internal burns in as little as 2 hours. Seek immediate medical attention or call the Poisons Information Centre on 13 11 26 if a battery may have been swallowed or placed inside any part of the body. The battery compartment is secured with a screw and must be kept closed. Do not use the meter if the battery compartment will not close securely.
How high will the 30ft pole reach?
The pole extends to about 9.18 m, and your own height adds to that. Most windows can be cleaned from the ground. One set back behind a gutter or roof line may need a ladder for the angle.
- 1Single storeyEasy work. Run it short and it's light in the hands all day. With room around the house, you can often do the solar panels from the ground too.
- 2Second storeyMost second storey windows can be cleaned from the ground.
- 3Third storeyMade for regular third storey work. With your own height it reaches about 10.7 m. Only need double storey? See the tank + 22ft bundle.
Solar panels up on the roof? Set an extension ladder up at the roof line and clean them from the ladder. Never stand or walk on the roof or the panels.
Carbon fibre and fibreglass: the best mix of the two
We picked a hybrid pole on purpose. It's strong enough for everyday work and still light enough to hold up all day.
- ✕Fibreglass onlyTough and cheap, but heavy. At full height it bends and sways, and your arms and shoulders feel it.
- ✕Carbon fibre onlyThe lightest option, but more brittle. A knock, a drop or an over-tightened clamp can crack it, and it costs a lot more to replace.
- ✓Hybrid, what we sellCarbon fibre keeps it light and stiff, fibreglass makes it tough. Tougher than full carbon, far lighter than fibreglass.
A pole on its own just moves tap water
The minerals in your tap water go up the pole with it, and they're what dry on the glass as spots. Pure water is what makes a water fed pole work.
How long will it last me?
Most sellers quote one generic number that has nothing to do with your situation. We work out yours, from your postcode or your own TDS reading.
| Your tap water | Lite 10L | Pro 15L | Commercial 25L |
|---|---|---|---|
| 100 ppm | 2,550 to 2,900 L | 4,000 to 4,500 L | 6,700 to 7,500 L |
| 200 ppm | 1,280 to 1,450 L | 2,000 to 2,250 L | 3,350 to 3,750 L |
| 300 ppm | 850 to 970 L | 1,330 to 1,500 L | 2,230 to 2,500 L |
| 400 ppm | 640 to 730 L | 1,000 to 1,130 L | 1,680 to 1,880 L |
| 500 ppm | 510 to 580 L | 800 to 900 L | 1,340 to 1,500 L |
Why litres, not houses? A first clean on a dirty house can use several times the water of a regular clean, and every operator works differently. Litres are the honest number, and experienced window cleaners already think in them.
Tap water changes through the year. Supplies get blended and dam levels move, so your reading can go up and down. Your free TDS meter always tells you where you stand: 0 ppm means fresh resin, doing its job. Above 10 ppm, it's time to replace the resin.
Very hard water? Above about 400 ppm the resin works a lot harder. Give us a call before you buy and we'll talk you through it.
Designed to handle pressure washer flow, so a water fed pole is easy work
Every tank we sell is built to keep up with a car pressure washer, and those usually pull somewhere between 5 and 10 litres a minute. A water fed brush only needs roughly 2 to 3 litres a minute to rinse glass properly.
So on a pole, the tank is working well within itself, giving you steady pure water at the brush from the first window to the last. The slower flow also gives the water more time with the resin, which helps it make the most of every fill.
It runs on your normal tap pressure. No pump, no power, nothing to plug in.
Make every fill go further with the bypass
Every tank comes with the bypass head already fitted. On a cool, shady side it saves a lot of resin. In full sun, skip it and use pure water the whole way.
- 1Scrub the whole side on bypass Tap water goes straight through to the brush, so none of your resin is used. Do the whole side before you switch.
- 2Flick to filter and run the hose clear Your hose is still full of tap water. Let it run until you hear air come through, then you know it's running pure. The longer the hose, the more water that takes, so switch once per side, not once per window.
- 3Rinse the whole side pure Rinse every window while the glass is still wet. Pure water leaves nothing behind, so it dries clear on its own.
Full sun? Skip the bypass. By the time you switch over and run the hose clear, tap water on hot glass has already dried into spots. On sunny sides, scrub and rinse with pure water only.
Cleaning solar panels the right way
Dust, pollen and bird droppings sit on your panels and get in the way of the sun. Here's how to clean them without doing any harm.
- Clean them coolGo early in the morning or late in the afternoon. Water on hot panels dries before you can rinse, and hot glass doesn't like cold water.
- Soft brush, tap pressureA soft brush and normal tap pressure is all it takes. Never use a pressure washer or anything abrasive on panels.
- Pure water, no soapNo detergent needed. Pure water lifts the dirt and leaves nothing behind, so there's no film for the next lot of dust to stick to.
- Stay off the roofOn a single storey with room around it, work from the ground. Otherwise clean from an extension ladder at the roof line. Never walk on the panels, and check your panel maker's cleaning instructions before you start.
Safety first: carbon fibre conducts electricity, and so does a wet pole. Never use one near overhead power lines, and keep well clear of the line into your house.
Why we don't add a carbon pre-filter
A carbon filter takes out chlorine, taste and smell. It doesn't take out the dissolved minerals that cause water spots, and those minerals are what use up your resin.
Most of Australia's big water supplies, including Sydney, Brisbane and much of WA, are disinfected with chloramine rather than chlorine. Chloramine is far harder for carbon to break down, and a small inline cartridge does very little to it at working flow.
We tested pre-filters with our own customers and saw no noticeable difference in resin life. So rather than charge you for a part that doesn't earn its place, we fit the bypass head, which does.
What our customers say
These are reviews of the same tank. Most come from people rinsing cars, which is the harder job for the tank.
Questions we get asked
Can I use the pole with plain tap water?
You can scrub with tap water, but if you rinse with it the glass dries with spots. The pure water rinse is what lets the glass dry clear without a squeegee.
How high does the pole reach?
The 30ft pole extends to about 9.18 m in 6 sections, and your own height adds to that, so it reaches about 10.7 m. It cleans most double storey windows from the ground and is made for regular third storey work. Closed up, it's just under 1.8 m long. Only need double storey? See the tank + 22ft bundle.
Can I clean my solar panels from the ground?
On a single storey home with room around it, often yes. Otherwise set an extension ladder up at the roof line and clean the panels from the ladder. Never stand or walk on the roof or the panels.
What else do I need?
A garden hose or hose reel to run from the tank to the pole. We leave it out on purpose: most people already have one, and everyone needs a different length. We use a 30 m reel so the tank stays put while we work our way around the house.
What is a DI tank?
DI stands for deionised. The tank is filled with resin that takes the dissolved minerals out of your tap water, so what comes out the other end dries clear instead of leaving spots.
When do I replace the resin?
Check the tank's output with your TDS meter. 0 ppm means fresh resin, doing its job. Above 10 ppm, it's time to replace the resin. Resin replacement kits start from $159 for the Lite and $225 for the Pro.
How many houses will I get out of it?
We don't quote houses, because a first clean can use several times the water of a regular clean, and every operator works differently. Put your postcode into the calculator for the litres you'll get, then compare that with what you use on a typical job.
Does it work for solar panels?
Yes. Solar panels need exactly the same thing as glass: pure water for the rinse so nothing is left behind when it dries.
Can I run two poles off one tank?
Yes, with a splitter after the tank. Keep in mind two poles use the resin twice as fast.
My water is very hard. Will it still work?
It will still give you pure water, but the resin won't go as far. Above about 400 ppm, call us before you buy and we'll help you work out whether it suits how much you clean.
Do I need a pump or power?
No. It runs on your normal tap pressure.
How do I store it between jobs?
Keep it out of direct sun, and close the tank off so the resin stays wet between jobs.
Lite tank $499 + 30ft pole kit $800 = $1,299 bought separately. Bundle $1,199, so you save $100.
The separate price is today's tank and pole kit prices added together.
- Free delivery Australia-wide
- Ships within the next business day
- Questions? 0423 364 936
Assembled and tested in Brisbane
Built from years on the tools. Nothing you won't use.
We've cleaned glass with water fed systems for years, and our customers keep telling us what they use and what sits in the shed. So the box holds what does the work, and nothing else.
The resin inside: HFR, the best of the 20+ resins we've tested. 0 ppm at the brush.
Left out on purpose
- Hose reel and long hoseMost people already own one, so we leave it out on purpose. Putting one in the box would mean buying it in and adding a margin on top, and the whole kit would cost more. Any garden hose fits, so use yours or grab the length your jobs need, 30 m or 50 m.
- Detergent tankPure water does the cleaning on glass and panels. In our experience, soap run through the pole sticks inside the 8 mm hose and takes a long flush to clear, and what's left dries as spots. When a job needs soap, fit a T-bar to the spare arm of the adapter and wash with soapy water, then turn the pole around and rinse it off with pure water through the brush.
- Carbon pre-filterIt doesn't take out the minerals that cause spots, and does little against chloramine. We tested it with customers and it made no noticeable difference to resin life.
- Freight chargesFree delivery Australia-wide, long pole box included.
You pay for the parts that do the work.
Why isn't there a hose to the pole in the box?
No hose reel in the box, on purpose. Most people already have one, and putting one in would mean buying it in and adding a margin, so the whole kit would cost more. If you don't have one, grab the length that suits your jobs from any hardware store, whether that's 30 m or 50 m. We only include what you'll actually use.
What if something breaks?
If something is faulty, we sort it out under the Australian Consumer Law. Spare brushes, the Fixi Clamp and the hose adapter are in stock in Brisbane, and we answer the phone on 0423 364 936.
Can I use my own pole or water system?
Yes. The pole connects to a standard garden hose fitting, so it runs off any pure water supply with a garden hose outlet. Our tanks run any pole the same way.







